What a spring here in the east – it really has been a Miracle March. This was probably the most snow I’ve ever seen at Mountain Creek NJ (my home mountain) and I got to ride some lines I’ve never even looked at before! There was that much snow! We had so many storms I totally forget what they called this one, but I’ll call it pretty damn epic. Freshies on every run! Check out the edit.
Mountain Mission 2018: February Teaser
February was one for the books! What an epic month – got to travel around to Whiteface NY, Revelstoke BC, Banff AB, and many more sick spots! It was truly a great month to be snowboarding, and I collected quite a few clips along the way. This is just a quick teaser to give you a taste of what went down – full edits are on the way and dropping soon so stay tuned!
Mountain Mission 2018: Hunter Mtn. Pow Day
So Hunter Mountain NY reported 28″ of fresh snow thanks to Winter Storm Riley. Unfortunately, this crazy dump also killed the power to the entire Hunter area – so I was forced to hike it to get the goods. The hike was epic and totally worth it. During my run down, ski patrol stopped next to me and told me that they just got power back and the lifts were going to spin in a few minutes – what a reward for that hike. Check out the video!
Gear Review: LIB x …Lost Puddle Jumper
Did you hear? Lib Tech and …Lost have teamed up! My god, what is this? Snow and surf companies can’t collaborate! That’s like, so backward dude.
Incorrect. It’s actually very much forward in a few ways.
To start, this is not the first time snow and surf companies have collaborated on a product. Back in 2015, Bataleon Snowboards put out a special version of its Camel Toe powder board in partnership with legendary longboard pioneer Bill Stewart. I’m sure there have been others as well, especially in the pow riding department.
That said, this might be the first time a snowboard company has contributed something new to the surfing world. If you don’t know what all this hype is about, let me explain.
When Lib Tech first announced they were making surfboards a few years back, I for one was not sold on the idea. Others would agree – I spoke to several surfers who hated the shapes that LIB came out with originally. That’s because LIB decided to make their own shapes, without any help from experienced surfboard shapers.
LIB had one big thing going for them though, and I saw this first hand on a surf trip to Cape Cod in 2015. I walked into a surf shop and was checking out the new LIB boards – one of the salesmen saw me and came over to give me a run-down of the boards. Before I knew what happened, he took a board out, threw it on the ground fins up, and stomped directly in the center with both feet. Everyone in the shop who saw this had a look of horror on their faces – that is, until the board popped back into shape perfectly about a half second later.
I say this because LIB’s surfboard construction is truly insane – what other surfboard material is capable of popping back into shape after a board-snapping blow like that? Nothing I know of. Firewire? Yea ok, test that theory and see what happens.
Lib Tech’s surfboard material is no doubt a heavily guarded industry secret – that said, they explain what they can here on their website. I can tell you from experience that it is lighter than foam/fiberglass, slightly more buoyant, and much better at not snapping in half. Also, the material doesn’t absorb water. That’s key since the material does puncture relatively easily, so be careful when putting it down on pavement or rocks. The good news is you can cover any punctures with stickers and be totally fine thanks to the material.
Around the time I saw proof of LIB’s insane materials, LIB went and teamed up with …Lost to produce some of …Lost’s shapes with LIB’s insane space-age construction. The result was a line of boards that performed really well (just ask surfers) but were virtually indestructible. The best part? When I got my LIB x …Lost Puddle Jumper, prices for these boards were about the same as your average brand-name fiberglass shaped board.
I own a 5’3” x 20” x 2.32” LIB x …Lost Puddle Jumper with a volume of 28cl. Keep in mind that because of LIB’s materials, you could get a LIB board with a little bit less volume than you normally would and it would still float just fine. I am a smaller guy, and this is the shortest surfboard I have ever ridden, but this thing floats and rips even better than my 5’6” stubbie with the same volume. For someone who mainly surfs in New Jersey, I ride this board during 90% of my sessions. It will make a 2-foot day into something amazing, but that is what they designed this shape for. Credit where it’s due, hats off to Matt Biolos and …Lost for this shape. Best small wave board I have ever ridden.
I say that because this thing generates speed very quickly. That extra volume/float combined with some cool shape features like a concave bottom that transitions to vee in the tail make it almost effortless to fly down the line on a weaker/smaller day. I also love the fact that this thing is shorter than my average shortboard because it makes it so maneuverable, especially on those smaller days. I have been able to do things on this board that I never have before.
I have ridden this board in waves up to 6 feet. For a small wave board, it held its own and frankly, it made me love this board even more. Anything bigger than that though, and I would want something a little longer and skinnier. For waves from 3-6 feet, I ride this board as a thruster (it has 5 fin boxes so you have options). My favorite setup is with the small lightweight FCS PC-3 fins. That’s because for me these fins are the perfect happy medium between twitchy/loose quad and less responsive larger fins. Speed is not an issue as a thruster thanks to the clever shaping by …Lost, and the response and power from these fins are immense.
Keep in mind that LIB’s fin boxes are their own design, but they will accommodate most major brands of fins. LIB’s fin boxes actually have a pretty cool feature – you can adjust the spacing of your fins by sliding them forward and back within the fin boxes.
A closer cluster = more twitchy, quick pivot and loose turns.
A spread-out cluster = more drawn out, gradual turns.
This adjustment actually makes a big difference in the feel of your board, for both thruster and quad setups. Experiment with it, find your sweet spot and mark it with some permanent marker.
Speaking of quads, this board is a riot when ridden as a quad. The first time I set it up like this, I almost got bucked off. The setup was very lively, almost too much. Speed was noticeably faster than the thruster. Turns were easy with instant response and crazy pivot stomping right on the tail. For this, the cluster was closer together than centered. Later, I tried spacing out the cluster as much as possible and it made the twitchiness go away for the most part, but it still had that looser, faster quad feel. Side note – I would love to try this setup with a nub fin as the 5th fin.
Bottom line: I love this shape from …Lost, and I love Lib Tech’s construction. It’s everything I wanted in a small wave board, at a reasonable price, and hopefully with a really long lifetime. That said, I would not recommend you purposefully try to stomp on your board to test its strength.
FCS PC-3 vs. PC-5 – Fin Size Matters
This is sort of a review, sort of a comparison, and sort of some advice for fin choice in general. I say that because fins depend on you – your ability level, weight, height, etc. Even the size of your board comes into play. Keep all this in mind when reading on below…
The reason I am comparing these fins to each other as well as on their own is because of something I learned the hard way – fin size matters. Before I knew what I was doing on a surfboard, I rode almost exclusively the entry-level FCS M-5 thruster (medium size fins), and sometimes as a quad with G-X trailer fins. Down the road, I acquired the PC-5 thruster set and began riding this (same size as M-5 fins). Just in the last year did I finally try the PC-3 set and I can confidently say that these small size fins are the right size for me (I’m about 5’8” 140lbs).
It took me years to realize it but I had been riding the wrong size fins for almost my entire surfing life. Side note – I have found that keeping a journal really helps in all board sports to get your setups dialed in exactly as you like with things like fins, board dimensions, etc.
So, I rode “-5” medium size fins for a long time but they were too big for me. This hurt my progression and my ability didn’t improve that much because I could not make the board turn as fast or as hard. Switching to the PC-3 and the smaller fin size was like putting performance tires on a car – suddenly, I could get the most out of my wave-riding vehicle. This definitely gives me more confidence in the water.
These two fin models from FCS are arguably some of their most popular. They are relatively cheap, solid fins ($82 from FCS directly) with good response and drive through turns. Both feature what FCS calls “performance core”, and FCS says they are lightweight performance fins (can’t argue there). They are both sold as quad and thruster packages, but this review concerns the thruster versions.
Once I found the right size fins, the PC Series became my favorite fin. I have been riding them on a 5’3” LIB x …Lost Puddle Jumper – the PC-3 thruster is my go-to setup for this board. I can get so much power and response out of these fins, it really opens up the possibilities for me. Speed is definitely not an issue, but a quad is still faster with these as side fins. That said, the thruster is good enough to get barreled.
The PC Series material is definitely snappier than the old M Series I had been riding for years. The snap is more aggressive as well, so a hard bottom turn is essential if you want to get these to release a bit. That is kind of the fun of it though – you really have to lay into it sometimes. If you do it well, the rewards are priceless. This forces you to work on technique and perfect every step – the drop, your line, the bottom turn, etc.
That said, I could never get this out of the PC Series when I rode the PC-5 due to the size. The PC-5 felt much less responsive and much less snappy. Even if I laid into turns on these fins, I never felt the flex doing any work to help me out. That’s really why size matter when it comes to fins – when the size is right, the fins respond and you can actually feel the flex working. That’s how it should be.
Overall, I would recommend the PC Series fins for intermediate-advanced surfers who want something predictable and responsive. They are priced right and widely available. I would say these fins work best in rippable, punchier waves where you want to go hard off the lip – the snap and response really helps these fins come into their own here. Don’t be afraid to really lay into these fins, as they will respond.
Just make sure you have the right size.
Raw Run: Adam Garcia | New York
New video just posted! Took a trip to New York this past weekend and got some clips of ballsy shredder and friend Adam Garcia bombing down a beautiful run in the woods. Here’s one of the raw runs..
Snowboard Season Ender 2015/2016
Well, winter is over and spring is (finally) here for real on the east coast. Despite the low snow numbers here this season, it was still my best season ever. Still scored, and I go out more days than I ever have. Looking forward to next year, but for now I’ll be enjoying a slightly warmer ocean. Cheers!
Mountain Mission: Breckenridge
AHHH! What a week of powder in Colorado! This was definitely some of the deepest pow and steepest terrain I’ve ever ridden. So blessed, so lucky, and still super stoked about the whole thing. I can’t believe the amount of pow I got in my face.
Monmouth University Snowriders | Stowe, VT
This past weekend the MU Snowriders (AKA the ski club) took a trip to Stowe, Vermont and scored! We woke up to pow on both days, which no one expected. Sick mountain, sick trip, and definitely some good times.
Mountain Mission: My Backyard
This week’s video of the week is a special backyard edition. My roommates and I built this in our backyard out of the 2+ feet of snow Winter Storm Jonas dropped in late January. It was a bitch to keep from melting but it was worth it!